Power Supply Board for Canon imageCLASS MF244dw / MF226dn / MF235dw / MF237w / MF249dw Original Imported
Original Power Supply Board for Canon imageCLASS MF244dw / MF226dn / MF235dw / MF237w / MF249dw — Imported
Get your Canon imageCLASS back to life with the PRM Original Power Supply Board. This is a genuine original board — not a compatible copy — sourced from original equipment and imported directly. One board fits across the entire Canon MF226/MF235/MF237/MF244/MF249 range.
Looking for a Canon MF244dw power supply, Canon MF226dn power board, or Canon MF249dw power supply? This is the correct power supply board for all of these printers.
When Do You Need a New Power Supply Board?
The power supply board converts mains AC power into the regulated DC voltages that run every component inside your printer — the formatter, fuser, motor, scanner, and WiFi module. When it fails, the entire printer is affected. Replace your power supply when you see:
- Printer completely dead — no lights, no display, no response when pressing the power button
- Printer turns on briefly then shuts off immediately
- Random shutdowns during printing — printer dies mid-job
- Fuser error messages — the power supply feeds the fuser heater; a weak supply causes temperature errors
- Burning smell from the power supply area (not from the fuser)
- Printer takes unusually long to warm up or never reaches ready state
- WiFi module not powering on — printer drops off the wireless network
- Flickering display or lights dimming during printing
- Scanner lamp not turning on during scan/copy
- Tripping your office power switch when the printer turns on
If you've checked the power cable, tried a different wall socket, and the printer still won't power on or keeps shutting down — the power supply board is almost certainly the cause.
1. One Board Fits Five Printers: This power supply board is compatible across the Canon imageCLASS MF244dw, MF226dn, MF235dw, MF237w, and MF249dw. Same board, same connectors — works in all models.
2. Original, Not Compatible: This is a genuine original Canon power supply board — the same board that came inside your printer from the factory. Original boards offer exact voltage regulation and long-term reliability that compatible copies cannot match. For a critical component like the power supply that feeds every part of your printer, original is the right choice.
3. Fixes the "Dead Printer" Problem: The most common power supply failure symptom is a completely dead printer — no lights, no response. Before you discard a perfectly good printer, a power supply replacement brings it back to life for a fraction of the cost of a new printer.
4. Resolves Fuser Errors Without Replacing the Fuser: Many fuser errors on these printers are actually power supply problems — the board can't deliver enough power to heat the fuser properly. If you've already replaced the fuser and still get temperature errors, the power supply is the fix.
5. Restores WiFi and All MFP Functions: These are all multifunction printers — print, scan, copy (MF249dw also includes fax). The power supply feeds every component including the WiFi module. A failing supply can cause seemingly unrelated problems across print, scan, copy, and wireless connectivity. A new board restores stable power to everything.
6. Restores Duplex Printing: The MF244dw, MF226dn, and MF249dw support automatic two-sided printing which demands extra power during the duplex cycle. A failing power supply often shows symptoms during duplex jobs first — the printer shuts down or throws errors. A new board restores stable duplex operation.
7. Easy Installation: Disconnect the printer from mains power, remove the side/rear panels, unplug the connectors from the old power supply board, swap in the new one, reconnect all cables, and reassemble. 20-30 minutes for any printer technician. Basic screwdriver needed.
8. Tested Before Shipping: Every PRM power supply board is tested for correct voltage output before dispatch. Backed by our testing warranty.
Compatible Printers:
Canon: imageCLASS MF244dw, MF226dn, MF235dw, MF237w, MF249dw
Also known as: Canon MF244dw Power Supply, Canon MF226dn Power Board, Canon MF237w Power Supply Board, Canon MF249dw SMPS Board, Canon MF235dw Power Supply, Canon MF244 SMPS, Canon MF249 Power Board
Product Information
Product Information
Shipping & Returns
Shipping & Returns

Power Supply Board for Canon imageCLASS MF244dw / MF226dn / MF235dw / MF237w / MF249dw Original Imported
Power Supply Board for Canon imageCLASS MF244dw / MF226dn / MF235dw / MF237w / MF249dw Original Imported
Original Power Supply Board for Canon imageCLASS MF244dw / MF226dn / MF235dw / MF237w / MF249dw — Imported
Get your Canon imageCLASS back to life with the PRM Original Power Supply Board. This is a genuine original board — not a compatible copy — sourced from original equipment and imported directly. One board fits across the entire Canon MF226/MF235/MF237/MF244/MF249 range.
Looking for a Canon MF244dw power supply, Canon MF226dn power board, or Canon MF249dw power supply? This is the correct power supply board for all of these printers.
When Do You Need a New Power Supply Board?
The power supply board converts mains AC power into the regulated DC voltages that run every component inside your printer — the formatter, fuser, motor, scanner, and WiFi module. When it fails, the entire printer is affected. Replace your power supply when you see:
- Printer completely dead — no lights, no display, no response when pressing the power button
- Printer turns on briefly then shuts off immediately
- Random shutdowns during printing — printer dies mid-job
- Fuser error messages — the power supply feeds the fuser heater; a weak supply causes temperature errors
- Burning smell from the power supply area (not from the fuser)
- Printer takes unusually long to warm up or never reaches ready state
- WiFi module not powering on — printer drops off the wireless network
- Flickering display or lights dimming during printing
- Scanner lamp not turning on during scan/copy
- Tripping your office power switch when the printer turns on
If you've checked the power cable, tried a different wall socket, and the printer still won't power on or keeps shutting down — the power supply board is almost certainly the cause.
1. One Board Fits Five Printers: This power supply board is compatible across the Canon imageCLASS MF244dw, MF226dn, MF235dw, MF237w, and MF249dw. Same board, same connectors — works in all models.
2. Original, Not Compatible: This is a genuine original Canon power supply board — the same board that came inside your printer from the factory. Original boards offer exact voltage regulation and long-term reliability that compatible copies cannot match. For a critical component like the power supply that feeds every part of your printer, original is the right choice.
3. Fixes the "Dead Printer" Problem: The most common power supply failure symptom is a completely dead printer — no lights, no response. Before you discard a perfectly good printer, a power supply replacement brings it back to life for a fraction of the cost of a new printer.
4. Resolves Fuser Errors Without Replacing the Fuser: Many fuser errors on these printers are actually power supply problems — the board can't deliver enough power to heat the fuser properly. If you've already replaced the fuser and still get temperature errors, the power supply is the fix.
5. Restores WiFi and All MFP Functions: These are all multifunction printers — print, scan, copy (MF249dw also includes fax). The power supply feeds every component including the WiFi module. A failing supply can cause seemingly unrelated problems across print, scan, copy, and wireless connectivity. A new board restores stable power to everything.
6. Restores Duplex Printing: The MF244dw, MF226dn, and MF249dw support automatic two-sided printing which demands extra power during the duplex cycle. A failing power supply often shows symptoms during duplex jobs first — the printer shuts down or throws errors. A new board restores stable duplex operation.
7. Easy Installation: Disconnect the printer from mains power, remove the side/rear panels, unplug the connectors from the old power supply board, swap in the new one, reconnect all cables, and reassemble. 20-30 minutes for any printer technician. Basic screwdriver needed.
8. Tested Before Shipping: Every PRM power supply board is tested for correct voltage output before dispatch. Backed by our testing warranty.
Compatible Printers:
Canon: imageCLASS MF244dw, MF226dn, MF235dw, MF237w, MF249dw
Also known as: Canon MF244dw Power Supply, Canon MF226dn Power Board, Canon MF237w Power Supply Board, Canon MF249dw SMPS Board, Canon MF235dw Power Supply, Canon MF244 SMPS, Canon MF249 Power Board
Original: $31.42
-65%$31.42
$11.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Original Power Supply Board for Canon imageCLASS MF244dw / MF226dn / MF235dw / MF237w / MF249dw — Imported
Get your Canon imageCLASS back to life with the PRM Original Power Supply Board. This is a genuine original board — not a compatible copy — sourced from original equipment and imported directly. One board fits across the entire Canon MF226/MF235/MF237/MF244/MF249 range.
Looking for a Canon MF244dw power supply, Canon MF226dn power board, or Canon MF249dw power supply? This is the correct power supply board for all of these printers.
When Do You Need a New Power Supply Board?
The power supply board converts mains AC power into the regulated DC voltages that run every component inside your printer — the formatter, fuser, motor, scanner, and WiFi module. When it fails, the entire printer is affected. Replace your power supply when you see:
- Printer completely dead — no lights, no display, no response when pressing the power button
- Printer turns on briefly then shuts off immediately
- Random shutdowns during printing — printer dies mid-job
- Fuser error messages — the power supply feeds the fuser heater; a weak supply causes temperature errors
- Burning smell from the power supply area (not from the fuser)
- Printer takes unusually long to warm up or never reaches ready state
- WiFi module not powering on — printer drops off the wireless network
- Flickering display or lights dimming during printing
- Scanner lamp not turning on during scan/copy
- Tripping your office power switch when the printer turns on
If you've checked the power cable, tried a different wall socket, and the printer still won't power on or keeps shutting down — the power supply board is almost certainly the cause.
1. One Board Fits Five Printers: This power supply board is compatible across the Canon imageCLASS MF244dw, MF226dn, MF235dw, MF237w, and MF249dw. Same board, same connectors — works in all models.
2. Original, Not Compatible: This is a genuine original Canon power supply board — the same board that came inside your printer from the factory. Original boards offer exact voltage regulation and long-term reliability that compatible copies cannot match. For a critical component like the power supply that feeds every part of your printer, original is the right choice.
3. Fixes the "Dead Printer" Problem: The most common power supply failure symptom is a completely dead printer — no lights, no response. Before you discard a perfectly good printer, a power supply replacement brings it back to life for a fraction of the cost of a new printer.
4. Resolves Fuser Errors Without Replacing the Fuser: Many fuser errors on these printers are actually power supply problems — the board can't deliver enough power to heat the fuser properly. If you've already replaced the fuser and still get temperature errors, the power supply is the fix.
5. Restores WiFi and All MFP Functions: These are all multifunction printers — print, scan, copy (MF249dw also includes fax). The power supply feeds every component including the WiFi module. A failing supply can cause seemingly unrelated problems across print, scan, copy, and wireless connectivity. A new board restores stable power to everything.
6. Restores Duplex Printing: The MF244dw, MF226dn, and MF249dw support automatic two-sided printing which demands extra power during the duplex cycle. A failing power supply often shows symptoms during duplex jobs first — the printer shuts down or throws errors. A new board restores stable duplex operation.
7. Easy Installation: Disconnect the printer from mains power, remove the side/rear panels, unplug the connectors from the old power supply board, swap in the new one, reconnect all cables, and reassemble. 20-30 minutes for any printer technician. Basic screwdriver needed.
8. Tested Before Shipping: Every PRM power supply board is tested for correct voltage output before dispatch. Backed by our testing warranty.
Compatible Printers:
Canon: imageCLASS MF244dw, MF226dn, MF235dw, MF237w, MF249dw
Also known as: Canon MF244dw Power Supply, Canon MF226dn Power Board, Canon MF237w Power Supply Board, Canon MF249dw SMPS Board, Canon MF235dw Power Supply, Canon MF244 SMPS, Canon MF249 Power Board




















